Go to homepage
€0.00

Millibar safety relief valve 1/8" NPT ULTRAVENT 6 ES

Skip image gallery
Picture of millibar valve ULTRAVENT 6 stainless steel 5-500 mbar
The diagram shows the blow-off volumetric flow rate and closing pressure of ULTRAVENT 6 without filter as a function of the set opening pressure
The diagram shows the blow-off volumetric flow rate and closing pressure of ULTRAVENT 6 with filter as a function of the set opening pressure
The diagram shows the blow-off volumetric flow rate and closing pressure of ULTRAVENT 6 with filter and dirt strainer as a function of the set opening pressure
Picture of millibar valve ULTRAVENT 6 stainless steel 5-500 mbar
The diagram shows the blow-off volumetric flow rate and closing pressure of ULTRAVENT 6 without filter as a function of the set opening pressure
The diagram shows the blow-off volumetric flow rate and closing pressure of ULTRAVENT 6 with filter as a function of the set opening pressure
The diagram shows the blow-off volumetric flow rate and closing pressure of ULTRAVENT 6 with filter and dirt strainer as a function of the set opening pressure

€381.40

Delivery time 10 days

Thread
Material
Valve disc
Seal
Inlet filter
Outlet strainer
Opening pressure [mbar]
The value must be between 5 and 500 and must be entered in steps of 1.
This field is a required field.
This field is a required field.
This field is a required field.
Product number: ULTRAVENT.86

Product information "Millibar safety relief valve 1/8" NPT ULTRAVENT 6 ES"

Unique, precise, and certified valve with numerous applications for millibar pressure gases. All safety valves are 100% tested.

Success factors / Unique selling points:
  • Precisely regulates pressure in the millibar range in any direction
  • Ideal as back pressure regulator, pressure regulator, safety valve, vacuum breaker
  • Exceptionally precise opening and closing behavior
  • TÜV type-tested according to DIN EN ISO 4126-1
  • The pressure setting you choose is TÜV-tested and certified
  • Proven reliability over > 100,000 cycles
  • Very low leakage rates
Special versions are not available in the shop, but can be requested:
  • Operating temperatures up to 270°C
  • FDA-approved materials, suitable for medical applications
  • PEEK housing
  • and much more...

If you have special requirements or requests, contact us – we are happy to help!

Blow-off flow rate: See data sheet (download area)
Sealing material: FKM
Opening pressure: 5-500 mbarg
Gas types: All technical gases
Inlet connection: 1/8" NPT (female thread)
Outlet connection: 1/8" NPT (female thread)
Housing material: Stainless steel (1.4404)
Spring material: Stainless steel (1.4310)
Seal ring material: FKM, other material on request
O-ring material: FKM, other material on request
Valve disc material: PEEK
Inlet filter: No
Outlet strainer: No
Temperature range: -30°C to 100°C, Up to 270°C on request
Wrench size: 13 mm
Weight: 42 g
Certification (no filter | 100-500 mbar): Safety valve DIN EN ISO 4126-1
Certification (no filter | 5-99 mbar): TÜV setting certificate for opening pressure
Certification (with filter | 5-500 mbar): Control/pressure holding valve with TÜV setting certificate for opening pressure
Datasheet

Manual

TÜV-Zertifikat (DIN EN ISO 4126-1)

Important note: TÜV certificate is only valid for variants without filter and an opening pressure between 100-500 mbar!


GET IN TOUCH!

This website uses cookies to ensure the best experience possible. More information...